1. Home
  2. Shop
  3. Openers
  4. Sommer
  5. Sommer Pro+ 2110 1.25HP Direct Drive Garage Door Operator
Sommer Pro+ 2110 1.25HP Direct Drive Garage Door Operator
Sommer Pro+ 2110 1.25HP Direct Drive Garage Door Operator

Sommer Pro+ 2110 1.25HP Direct Drive Garage Door Operator

Write a Review
$449.02
Retail Price:$518.10
You Save:$69.08(13%)
Part Number: YS10255-00001
Sommer
The Sommer Pro+ 2100 Operator from Garage Door Supply Co is a versatile garage door opener for doors weighing up to 1,500 pounds. Sommer Pro+ operators use a direct drive design with a traveling motor that glides silently on a fixed chain. Direct Drive operator technology maximizes strength while minimizing moving parts and operator noise/vibration. The Pro+ 2100 has an 1100 Newton or 1.25 HP equivalent motor that moves up to 7” per second. This Sommer Operator uses a flexible separate control housing that can be installed virtually anywhere in the garage within 16’ of the operator rail (front, rear, or ceiling). Pro+ models are ideal for installations with limited backroom or for retrofitting buildings not wired for a garage door operator ahead of time (Operator controls required to be a minimum of 5’ from a moving door for safety)

Security and Safety:

  • 922.5 MHz radio controls with 128-bit encryption
  • Positive push-back by the operator in case of attempted forced entry
  • Optional buzzer and lock for additional security
  • Continuously adjusted force curves for maximum safety and obstacle detection
  • Operators adjust speed based on door balance and weight for optimal speed and safety
  • Monitored optical safety sensors included
  • Optional monitored safety edge can be added
Features:
  • 4-channel on board radio receiver for optional functions with 40-slot on board memory
  • Engineered to 125,000 cycles in beta stage with third-party certification
  • Mid-stop and automatic closing enabled
  • Interlock capable
  • 1100 Newton Motor - Speeds up to 7” per second - maximum door weight 1,500 lbs
  • Monitored safety edge or optical safety edge capable
  • Alternate timing for internal and external lighting with radio channel 2
  • 12VDC power supply at the motor carriage and 24VDC power supply at the control housing
  • Homelink compatible
  • Mount the control housing anywhere a power outlet is available
  • The 24V connector wire between the control housing and rail is a low voltage wiring making for an easier installation (no electrician required)
TOP