1. Home
  2. Shop
  3. Openers
  4. Genie Garage Door Openers
  5. SilentMax 1000 140V DC Residential Belt Drive Garage Door Opener (Model 3042-TKH) by Genie 37281X
SilentMax 1000 140V DC Residential Belt Drive Garage Door Opener (Model 3042-TKH) by Genie 37281X
SilentMax 1000 140V DC Residential Belt Drive Garage Door Opener (Model 3042-TKH) by Genie 37281X

SilentMax 1000 140V DC Residential Belt Drive Garage Door Opener (Model 3042-TKH) by Genie 37281X

Write a Review
$429.34
SilentMax 1000 140V DC Residential Belt Drive Garage Door Opener (Model 3042-TKH) by Genie 37281X- Light System, 2 Transmitters, Wall Console & Keyless Entry System
Part Number: 37281X
Genie 37281X

The Genie 3042-TKH SilentMax 1000 belt drive garage door opener from Garage Door Supply Company was named for its super quiet operation. Genie's SilentMax 1000 garage door opener is compatible with residential garages with 7-foot high doors. Or, order an optional extension kit for use with 8-foot doors. This garage door operator's 3/4-horsepower DC motor is engineered for soft starts and soft stops. Genie's SilentMax 1000 relies on Genie's trademarked GenieSense door operation monitoring system that also minimizes noise. Built-in Intellicode rolling code technology automatically changes the access code every time it's used to prevent hacking.

The 315 MHz/390 MHz model 3042-TKH Genie SilentMax 1000 is compatible with all HomeLink, Car2U and Aladdin Connect systems. Genie's trademarked Safe-T-Beam safety sensor system stops and reverses a closing door's movement if movement beneath the door is detected. A manual emergency release allows manual operation of the door. This residential garage door opener comes with two pre-programmed remote control transmitters, a wall console to operate the lights from inside your garage and a wireless keypad to enter without having to use a key or remote. Genie's SilentMax garage door operators are assembled in the U.S. Each carries a limited lifetime warranty on the motor.

Product Highlights:

  • 3042-TKH
  • 315 MHz/390 MHz
  • Super quiet operation
  • Trademarked GenieSense monitoring system
  • For 7' doors (8' with optional extension)
  • 3/4 HP 140V DC motor
  • Compatible with HomeLink, Aladdin Connect, Car2U systems
  • Includes Genie GSTB-BX safety beam set
  • Includes 2 pre-programmed Genie G3T-BX Intellicode 3-button garage door remotes
  • Includes 1 Genie GBWC2-BX Series II wall console
  • Includes 1 Genie GWKP wireless keypad
PLEASE NOTE: Genie Battery Backup will only operate after operator installation is completed and Travel Limits have been set. Assembled in the U.S.A. with a Limited Lifetime Motor Warranty (see manual for limitations and details).

WHAT'S INCLUDED

  • One (1) Genie GSTB-BX Safety Beam Set (Item #37220R)
  • Two (2) Genie G3T-BX Intellicode 3-Button Garage Door Remotes (Item #G3T-BX)
  • One (1) Genie GBWC2-BX Series II Wall Console (Item #38066R-39165R)
  • One (1) Genie GWKP Wireless Keypad (Item #35282R)

PRODUCT HIGHLIGHTS

  • Item Number: 37281X
  • SilentMax® 1000 Residential Belt Drive Garage Door Opener (Model 3042-TKH) by Genie
  • ¾ HPc 140 Volt DC Motor: Provides power to operate almost any residential garage door up to 7' high from the box, or up to 8' high with the Genie 8' Door Chain Extension Kit Model EKBC (sold separately here - Item #37302R).
  • Maximum Opening Speed: 7.5 inches per second to provide the ultimate in fast performance.
  • GenieSense™ Monitoring and Diagnostic Technology: Provides safety by continuously monitoring the operation of the door, stopping the operation to alert you when significate changes occur.
  • Intellicode® Security: Superior encryption technology (also known as rolling codes) that prevents piracy of the radio signal that opens your garage door by continually seeking a new code from billions of combinations. The door opener responds to each new code only once. If an access code is copied from a working system and tried again, it will not control the door opener.
  • HomeLink® & Car2U® Compatible: Works with ALL HomeLink and Car2U systems regardless of when those systems were made. No additional external repeater box or compatibility bridge needed.
  • Compatible with Aladdin Connect™
  • Auto Seek Dual Frequency System: Automatically seeks either 315 or 390 MHz frequency produced by a remote, helping to ensure the opener will respond regardless of nearby frequency interference.
  • Safe-T-Beam® (STB) Non-Contact Reversing System: Puts an invisible beam across the door opening. If anything passes through the beam, the door stops and reverses to the fully open position. LED indicator lights on the powerhead and on the STBs provide self-diagnostics in the event of an operational problem.
  • Door Detect™ Monitoring System: Monitors the Safe-T-Beam®to ensure it is functioning properly and that a closing door will automatically stop/reverse if a problem is detected.
  • Safe-T-Reverse® Contact Reversing System: Closing door automatically stops and reverses within two seconds of contact with an object.
  • Manual Emergency Release: In the event of a power failure or other emergency, the Manual Emergency Release will manually release the door from the door opener to allow manual opening and closing of the door.
  • SmartSet® Electronic Programming: Easily adjust the programming to set limits and program new remotes.
  • Pre-Programmed Remotes: The remote included with this operator comes from the factory, pre-programmed for quick and easy installation. No additional steps are required to activate the door using the remote.
  • Wall Console (Selected Models): Operates door opener from inside the garage. Features an indicator light with Open/Close, Sure-Lock, and independent light control buttons.
  • Automatic Lighting System: Double bulb lighting system with integrated motion detector provides convenience and security to the two (2) 100-Watt bulb lighting system. Turns ON when the door is activated and automatically turns OFF 4 minutes later for safer evening exits and entries.
  • Genie Battery Backup (BBU): Available on some models. Provides power to the opener in the event of a power failure. PLEASE NOTE: Genie Battery Backup will only operate after operator installation is completed and Travel Limits have been set.
TOP